The claim
For actuals and forecasts of any sign, . So the expected sMAPE of every forecast is finite, between 0 and 200, whatever the distribution of the actuals and without any moment of it being finite (unlike RMSE, MAE and MAPE, C8). For a positive random actual , at least one forecast has the lowest expected sMAPE.
Proof: E21 · Data: E1 · Uses: C3 · Extends: B10 · Verification: checked by an agent · Planned: lab plan PL9, planned 17 November 2026 · Outcome: judged by the writer
For and , the sMAPE term depends on and only through their ratio : .
Proof: E18 · Data: E1 · Extends: B12 · Verification: checked by an agent · Planned: lab plan PL9, planned 17 November 2026 · Outcome: judged by the writer
For and , the sMAPE term is (log error ). (a) It is 0 when , strictly increasing and concave in , and bounded by 1, which it approaches as grows. (b) ; so when all log errors are small, sMAPE is about 100 times the mean absolute error of as a forecast of (log-MAE). (c) The log-MAE of a test set is minimised by its median; sMAPE is then minimised near the median, not in general at it. For positive actuals with a median , a forecast that minimises their sMAPE satisfies its mean absolute log error exceeds the smallest possible by at most a twelfth of its mean cubed absolute log error. The minimiser is the median itself only under further conditions on the distribution of the actuals.
Proof: E20 · Data: E31 · Uses: C1 · Extends: B12 · Verification: checked by an agent · Planned: lab plan PL12, planned 18 November 2026 · Outcome: judged by the writer
Evidence
Numerical checks of the formulas of the formal claims (formula checks), lab run RN8 under the formal plan that decided them; every check is within the plan's tolerances. They check the formulas on concrete numbers; the proofs are the evidence for the claims. The rows are labelled by the hypotheses of the record's first plan, whose wording kept the factor 200: H1 checks C1; H2 and H10 check C2; H5 checks C5; H7 checks C6; H8 checks C7; H12 checks C8; H13 checks C9; H14 checks C10. H3 and H9 checked C3, and H4 and H6 checked C4, as version 2 worded them; C3, C4 and C12 as now worded are checked in E31. The two results E1.R1 and E1.R2 compare a simulated variance with the large-sample variance that C19 now proves.
Setup: studied sMAPE term, expected sMAPE, log error, weight, sMAPE target · procedure formula checks
- R1 simulated n Var(ln sMAPE minimiser) / large-sample value, lognormal sigma=1 = 0.9944 99% confidence interval 0.9354 to 1.0598 (hypothesis: H11, test-set size: 1000, test sets: 4000)
- R2 simulated n Var(ln sMAPE minimiser) / large-sample value, lognormal sigma=1 = 1.022 99% confidence interval 0.9396 to 1.0982 (hypothesis: H11, test-set size: 10000, test sets: 2000)
- R3 maximum absolute difference from the ratio form = 0.0000 (hypothesis: H1)
- R4 maximum absolute difference between the ratio and its reciprocal = 0.0000 (hypothesis: H2)
- R5 maximum absolute difference from 200 tanh(|z|/2) = 0.0000 (hypothesis: H3)
- R6 violations of monotonicity, concavity or the bound 200 on 0 <= |z| <= 12 = 0 (hypothesis: H3)
- R7 violations of 0 <= 100|z| - s <= 25|z|^3/3 = 0 (hypothesis: H9)
- R8 maximum of |s - 100|z| + 25|z|^3/3| / |z|^5 for 0.05 < |z| < 0.5 = 0.8331 (hypothesis: H9)
- R9 violations of s(y, y+e) < s(y, y-e) = 0 (hypothesis: H10)
- R10 maximum absolute difference between s(y, ky) and s(y, y/k) = 0.0000 (hypothesis: H10)
- R11 maximum relative difference between the formula for S' and a numerical derivative = 0.0000 (hypothesis: H4)
- R12 maximum distance in ln f between the minimiser and the median = 0.0000 (hypothesis: H5)
- R13 number of local minima, lognormal sigma=1 and log-Laplace b=1 = 1 (hypothesis: H5)
- R14 maximum balance residual at the minimiser (pull below minus pull above) = 0.0000 (hypothesis: H6)
- R15 settings with one local minimum where the sign of D misplaces the target = 0 (hypothesis: H6)
- R16 maximum distance between the one-step and the exact quantile level = 0.0025 (hypothesis: H6)
- R17 2 g(m) - E[sech^2(Z/2) tanh(|Z|/2)] for the equal-mode bimodal setting (negative: median a local maximum) = -0.3475 (hypothesis: H7)
- R18 number of local minima of the equal-mode bimodal setting = 2 (hypothesis: H7)
- R19 difference between the two minimal expected sMAPEs, equal-mode bimodal setting = 0.0000 (hypothesis: H7)
- R20 maximum distance between the formula and the bisected threshold = 0.0000 (hypothesis: H8)
- R21 opposite-sign or one-zero pairs not scoring 200 = 0 (hypothesis: H8)
- R22 relative distance between the 1/y-weighted median and the minimiser of expected MAPE = 0.0001 (hypothesis: H12)
- R23 difference of expected squared errors minus (f1-f2)(f1+f2-2E[y]) = 0 (hypothesis: H12)
- R24 sMAPE terms outside [0, 200] = 0 (hypothesis: H13)
- R25 expected sMAPE at f = 1e-6 and f = 1e10 (both near 200) = 200 (hypothesis: H13)
- R26 the proof's bound on the error times sigma^3, 600 zeta(3) max|g''|, log-Gumbel = 309.9 (hypothesis: H14)
- R27 limit of sigma^3 times the relative efficiency for normal log-outcomes, from the proof = 7.226 (hypothesis: H14)
| Row | setting | zero threshold |
|---|---|---|
| r1 | lognormal sigma=0.3 | 0.4687 |
| r2 | lognormal sigma=0.5 | 0.4469 |
| r3 | lognormal sigma=1 | 0.394 |
| r4 | lognormal sigma=2 | 0.3075 |
| Row | sigma | maximum |S - (200 - 800 ln2 h)| times sigma^3, log-Gumbel right | sigma^3 times the asymptotic relative efficiency, lognormal |
|---|---|---|---|
| r1 | 5.0 | 264.5 | 5.613 |
| r2 | 10.0 | 292.3 | 6.743 |
| r3 | 20.0 | 300.1 | 7.099 |
| r4 | 40.0 | 302.1 | 7.193 |
Numerical checks of the formulas of the claims new or reworded in version 3 (formula checks), lab run RN13 (check_v3.py, seed 8) under the formal plan that decided C3, C4, C12, C17 and C20; every check is within the plan's tolerances. They check the formulas on concrete numbers; the proofs are the evidence for the claims. The tables are labelled by the hypotheses the run's script names: H3 (T1 and T2) checks C3; H4 (T3) checks C4; H34 (T4 and T5) checks C12; H35 (T6 and T7) checks C17; H42 (T8 and T9) checks C20. The tables of H39 (T10 to T12) and H40 (T13 to T17) check the formulas of C18 and C19, whose wording was decided after later checks (E32, E33).
Setup: studied sMAPE term, Suilin term, msMAPE term, sMAPE target, sMAPE minimiser of a test set · procedure formula checks · lens signal-to-noise ratio of a comparison, relative efficiency, weight, log error, log-MAE, MAE, RMSE
| Row | violations of the bound on the log-MAE of the sMAPE minimiser | largest excess of the minimiser's log-MAE over the median's, minus the bound |
|---|---|---|
| r1 | 0 | 0.0000 |
| Row | sum of sMAPE terms, forecast at the median, actuals 1, 1, e, e^4, e^4 | sum of sMAPE terms, forecast at 1, actuals 1, 1, e, e^4, e^4 |
|---|---|---|
| r1 | 2.735 | 2.39 |
| Row | largest difference of the weights below and above the target, over their sum |
|---|---|
| r1 | 0.0000 |
| Row | distributions with more than one local minimum | distributions where the target is not on the side of the median that carries more weight |
|---|---|---|
| r1 | 0 | 0 |
| Row | largest distance in logs between the target and the median, lognormal and log-Laplace |
|---|---|
| r1 | 0.0000 |
| Row | Suilin term of a zero forecast of a zero actual |
|---|---|
| r1 | 0 |
| Row | largest error of the identity of (a) | largest error of the identity of (b) | values of the Suilin term outside [0, 1) |
|---|---|---|---|
| r1 | 0.0000 | 0 | 0 |
| Row | nu | largest error of the identity of (a) | largest error of the identity of (b) | values of the msMAPE term outside [0, 1] | values of the msMAPE term not below 1 for actuals below nu | pairs with a count of at least 1 where the msMAPE and sMAPE terms differ |
|---|---|---|---|---|---|---|
| r1 | 0.1 | 0 | 0 | 0 | 0 | 0 |
| r2 | 0.5 | 0 | 0 | 0 | 0 | 0 |
| r3 | 1.0 | 0 | 0 | 0 | 0 | 0 |
| Row | nu | msMAPE term of a forecast of 1e-9 for a zero actual |
|---|---|---|
| r1 | 0.1 | 0.0000 |
| r2 | 0.5 | 0.0000 |
| r3 | 1.0 | 0.0000 |
| Row | error_distribution | c1 | c2 | signal-to-noise ratio of sMAPE over its large-spread formula | signal-to-noise ratio of the absolute error over its limit |
|---|---|---|---|---|---|
| r1 | normal | 0.0 | 0.5 | 0.9999 | 0.9913 |
| r2 | normal | 0.0 | 1.0 | 1 | 0.9956 |
| r3 | normal | -0.5 | 1.5 | 1.001 | 0.9966 |
| r4 | Gumbel | 0.0 | 0.5 | 0.9998 | 0.9647 |
| r5 | Gumbel | 0.0 | 1.0 | 1 | 0.9937 |
| r6 | Gumbel | -0.5 | 1.5 | 1 | 0.9967 |
| Row | error_distribution | c1 | c2 | relative spread of the absolute log error's signal-to-noise ratio over sigma = 2, 10, 50 |
|---|---|---|---|---|
| r1 | normal | 0.0 | 0.5 | 0.0000 |
| r2 | normal | 0.0 | 1.0 | 0.0000 |
| r3 | normal | -0.5 | 1.5 | 0.0000 |
| r4 | Gumbel | 0.0 | 0.5 | 0.0000 |
| r5 | Gumbel | 0.0 | 1.0 | 0.0000 |
| r6 | Gumbel | -0.5 | 1.5 | 0.0000 |
| Row | c1 | c2 | sigma | signal-to-noise ratio of the squared error over its formula, lognormal | exp(sigma^2 / 2) times the squared error's ratio, lognormal, formula |
|---|---|---|---|---|---|
| r1 | 0.0 | 0.5 | 0.5 | 1 | |
| r2 | 0.0 | 1.0 | 0.5 | 1 | |
| r3 | -0.5 | 1.5 | 0.5 | 1 | |
| r4 | 0.0 | 0.5 | 1.0 | 1 | |
| r5 | 0.0 | 1.0 | 1.0 | 1 | |
| r6 | -0.5 | 1.5 | 1.0 | 1 | |
| r7 | 0.0 | 0.5 | 2.0 | 1 | |
| r8 | 0.0 | 1.0 | 2.0 | 1 | |
| r9 | -0.5 | 1.5 | 2.0 | 1 | |
| r10 | 0.0 | 1.0 | 4.0 | 0.9907 | |
| r11 | 0.0 | 1.0 | 6.0 | 1 |
| Row | distributions compared with the asymptotic values recorded by RN7 |
|---|---|
| r1 | 16 |
| Row | distributions where A is not below 2 g at the median | largest difference from the asymptotic values recorded by RN7 |
|---|---|---|
| r1 | 0 | 0.0001 |
| Row | family | spread | large-sample relative efficiency, formula |
|---|---|---|---|
| r1 | lognormal | 0.25 | 0.9696 |
| r2 | lognormal | 0.5 | 0.8881 |
| r3 | lognormal | 1.0 | 0.6601 |
| r4 | lognormal | 1.5 | 0.454 |
| r5 | lognormal | 2.0 | 0.3073 |
| r6 | lognormal | 3.0 | 0.1474 |
| r7 | lognormal | 4.0 | 0.0778 |
| r8 | lognormal | 6.0 | 0.0279 |
| r9 | log-Laplace | 0.25 | 0.9969 |
| r10 | log-Laplace | 0.5 | 0.9765 |
| r11 | log-Laplace | 1.0 | 0.8953 |
| r12 | log-Laplace | 1.5 | 0.8036 |
| r13 | log-Laplace | 2.0 | 0.7207 |
| r14 | log-Laplace | 3.0 | 0.5903 |
| r15 | log-Laplace | 4.0 | 0.4969 |
| r16 | log-Laplace | 6.0 | 0.3755 |
| Row | family | distance of the large-sample relative efficiency from 1 at spread 0.01 |
|---|---|---|
| r1 | lognormal | 0.0001 |
| r2 | log-Laplace | 0.0000 |
| Row | large-sample relative efficiency times sigma^3 over 6 (ln 2)^2 sqrt(2 pi), lognormal | large-sample relative efficiency times b over 3, log-Laplace |
|---|---|---|
| r1 | 0.9998 | 0.9906 |
Numerical checks of the formulas of C18 (formula checks), lab run RN18 (check_h39.py) under the formal plan that decided C18; every check is within the plan's tolerances. They check the formulas on concrete numbers; the proof is the evidence for the claim. The run's script labels the checks H39, the record's first wording of C18; the formulas are those of C18.
Setup: studied sMAPE term · procedure formula checks · lens signal-to-noise ratio of a comparison, log-MAE, MAE, RMSE
| Row | error_distribution | c1 | c2 | sigma | distance of sMAPE's signal-to-noise ratio over its large-spread formula from 1 | distance of the absolute error's signal-to-noise ratio over its limit from 1 |
|---|---|---|---|---|---|---|
| r1 | normal | 0.0 | 0.5 | 200 | 0.0001 | 0.0087 |
| r2 | normal | 0.0 | 0.5 | 2000 | 0.0000 | 0.0009 |
| r3 | normal | 0.0 | 1.0 | 200 | 0.0004 | 0.0044 |
| r4 | normal | 0.0 | 1.0 | 2000 | 0.0000 | 0.0004 |
| r5 | normal | -0.5 | 1.5 | 200 | 0.0012 | 0.0034 |
| r6 | normal | -0.5 | 1.5 | 2000 | 0.0001 | 0.0003 |
| r7 | Gumbel | 0.0 | 0.5 | 200 | 0.0002 | 0.0353 |
| r8 | Gumbel | 0.0 | 0.5 | 2000 | 0.0000 | 0.0035 |
| r9 | Gumbel | 0.0 | 1.0 | 200 | 0.0002 | 0.0063 |
| r10 | Gumbel | 0.0 | 1.0 | 2000 | 0.0000 | 0.0006 |
| r11 | Gumbel | -0.5 | 1.5 | 200 | 0.0004 | 0.0033 |
| r12 | Gumbel | -0.5 | 1.5 | 2000 | 0.0000 | 0.0003 |
| Row | error_distribution | c1 | c2 | relative spread of the absolute log error's signal-to-noise ratio over sigma = 2, 10, 50 |
|---|---|---|---|---|
| r1 | normal | 0.0 | 0.5 | 0.0000 |
| r2 | normal | 0.0 | 1.0 | 0.0000 |
| r3 | normal | -0.5 | 1.5 | 0.0000 |
| r4 | Gumbel | 0.0 | 0.5 | 0.0000 |
| r5 | Gumbel | 0.0 | 1.0 | 0.0000 |
| r6 | Gumbel | -0.5 | 1.5 | 0.0000 |
| Row | c1 | c2 | sigma | distance of the squared error's signal-to-noise ratio over its formula from 1, lognormal | distance of exp(sigma^2 / 2) times the squared error's ratio from 1, lognormal, formula |
|---|---|---|---|---|---|
| r1 | 0.0 | 0.5 | 0.5 | 0.0000 | |
| r2 | 0.0 | 1.0 | 0.5 | 0.0000 | |
| r3 | -0.5 | 1.5 | 0.5 | 0.0000 | |
| r4 | 0.0 | 0.5 | 1.0 | 0.0000 | |
| r5 | 0.0 | 1.0 | 1.0 | 0.0000 | |
| r6 | -0.5 | 1.5 | 1.0 | 0.0000 | |
| r7 | 0.0 | 0.5 | 2.0 | 0.0000 | |
| r8 | 0.0 | 1.0 | 2.0 | 0.0000 | |
| r9 | -0.5 | 1.5 | 2.0 | 0.0000 | |
| r10 | 0.0 | 1.0 | 4.0 | 0.0093 | |
| r11 | 0.0 | 1.0 | 6.0 | 0.0000 | |
| r12 | 0.0 | 1.0 | 8.0 | 0.0000 |
Numerical checks of the formulas of C19 (formula checks), lab run RN16 (check_corrected.py, seed 8) under the formal plan that decided C19; every check is within the plan's tolerances. They check the formulas on concrete numbers; the proof is the evidence for the claim. The run's script labels the checks by the record's first wordings: H40 (T4 to T7 and the result R1) checks C19; H39 (T1 to T3) checks the formulas of C18, which the same plan tested in an earlier wording.
Setup: studied sMAPE term, sMAPE minimiser of a test set · procedure formula checks · lens signal-to-noise ratio of a comparison, relative efficiency, log-MAE, MAE, RMSE
- R1 distributions compared with the asymptotic values recorded by RN7 = 16 (hypothesis: H40)
| Row | error_distribution | c1 | c2 | sigma | distance of sMAPE's signal-to-noise ratio over its large-spread formula from 1 | distance of the absolute error's signal-to-noise ratio over its limit from 1 |
|---|---|---|---|---|---|---|
| r1 | normal | 0.0 | 0.5 | 200 | 0.0001 | 0.0087 |
| r2 | normal | 0.0 | 0.5 | 2000 | 0.0000 | 0.0009 |
| r3 | normal | 0.0 | 1.0 | 200 | 0.0004 | 0.0044 |
| r4 | normal | 0.0 | 1.0 | 2000 | 0.0000 | 0.0004 |
| r5 | normal | -0.5 | 1.5 | 200 | 0.0012 | 0.0034 |
| r6 | normal | -0.5 | 1.5 | 2000 | 0.0001 | 0.0003 |
| r7 | Gumbel | 0.0 | 0.5 | 200 | 0.0002 | 0.0353 |
| r8 | Gumbel | 0.0 | 0.5 | 2000 | 0.0000 | 0.0035 |
| r9 | Gumbel | 0.0 | 1.0 | 200 | 0.0002 | 0.0063 |
| r10 | Gumbel | 0.0 | 1.0 | 2000 | 0.0000 | 0.0006 |
| r11 | Gumbel | -0.5 | 1.5 | 200 | 0.0004 | 0.0033 |
| r12 | Gumbel | -0.5 | 1.5 | 2000 | 0.0000 | 0.0003 |
| Row | error_distribution | c1 | c2 | relative spread of the absolute log error's signal-to-noise ratio over sigma = 2, 10, 50 |
|---|---|---|---|---|
| r1 | normal | 0.0 | 0.5 | 0.0000 |
| r2 | normal | 0.0 | 1.0 | 0.0000 |
| r3 | normal | -0.5 | 1.5 | 0.0000 |
| r4 | Gumbel | 0.0 | 0.5 | 0.0000 |
| r5 | Gumbel | 0.0 | 1.0 | 0.0000 |
| r6 | Gumbel | -0.5 | 1.5 | 0.0000 |
| Row | c1 | c2 | sigma | distance of the squared error's signal-to-noise ratio over its formula from 1, lognormal | distance of exp(sigma^2 / 2) times the squared error's ratio from 1, lognormal, formula |
|---|---|---|---|---|---|
| r1 | 0.0 | 0.5 | 0.5 | 0.0000 | |
| r2 | 0.0 | 1.0 | 0.5 | 0.0000 | |
| r3 | -0.5 | 1.5 | 0.5 | 0.0000 | |
| r4 | 0.0 | 0.5 | 1.0 | 0.0000 | |
| r5 | 0.0 | 1.0 | 1.0 | 0.0000 | |
| r6 | -0.5 | 1.5 | 1.0 | 0.0000 | |
| r7 | 0.0 | 0.5 | 2.0 | 0.0000 | |
| r8 | 0.0 | 1.0 | 2.0 | 0.0000 | |
| r9 | -0.5 | 1.5 | 2.0 | 0.0000 | |
| r10 | 0.0 | 1.0 | 4.0 | 0.0093 | |
| r11 | 0.0 | 1.0 | 6.0 | 0.0000 | |
| r12 | 0.0 | 1.0 | 8.0 | 0.0000 |
| Row | family | spread | large-sample relative efficiency, formula |
|---|---|---|---|
| r1 | lognormal | 0.25 | 0.9696 |
| r2 | lognormal | 0.5 | 0.8881 |
| r3 | lognormal | 1.0 | 0.6601 |
| r4 | lognormal | 1.5 | 0.454 |
| r5 | lognormal | 2.0 | 0.3073 |
| r6 | lognormal | 3.0 | 0.1474 |
| r7 | lognormal | 4.0 | 0.0778 |
| r8 | lognormal | 6.0 | 0.0279 |
| r9 | log-Laplace | 0.25 | 0.9969 |
| r10 | log-Laplace | 0.5 | 0.9765 |
| r11 | log-Laplace | 1.0 | 0.8953 |
| r12 | log-Laplace | 1.5 | 0.8036 |
| r13 | log-Laplace | 2.0 | 0.7207 |
| r14 | log-Laplace | 3.0 | 0.5903 |
| r15 | log-Laplace | 4.0 | 0.4969 |
| r16 | log-Laplace | 6.0 | 0.3755 |
| Row | family | distance of the large-sample relative efficiency from 1 at spread 0.01 |
|---|---|---|
| r1 | lognormal | 0.0001 |
| r2 | log-Laplace | 0.0000 |
| Row | distributions where A is not below 2 g at the median | largest difference from the asymptotic values recorded by RN7 |
|---|---|---|
| r1 | 0 | 0.0001 |
| Row | large-sample relative efficiency times sigma^3 over 6 (ln 2)^2 sqrt(2 pi), lognormal | large-sample relative efficiency times b over 3, log-Laplace |
|---|---|---|
| r1 | 0.9998 | 0.9906 |
Proof of C1 (section H1 of the proof document A1, rendered in A2). Only the ratio of the actual to the forecast matters, not their size.
Foundation: Kolmogorov probability axioms and real analysis
- Since and are positive, . So . (algebra; from D1)
- Dividing the numerator and the denominator by gives . Since , . And . (algebra; from S1)
- So . The contribution depends only on the ratio of actual to forecast. (conclusion; from S2)
Proof of C3 (section H3 of the proof document A1, rendered in A2). sMAPE measures the error on the log scale. For small errors it is half the absolute log error; for large errors it levels off.
Foundation: Kolmogorov probability axioms and real analysis
- Write , so that . By C1, . (definition; from C1)
- Multiplying the numerator and the denominator of by gives . The denominator is positive, so . (algebra; from S1)
- changes only its sign when its argument changes sign: , as the definition shows. So , which is the stated form. (algebra; from S2)
- For (a): is 0 at 0. On it is strictly increasing and concave, and it approaches 1 as its argument grows; its derivative is positive and decreasing for . With the argument , has these properties in . (monotonicity; from S3)
- For (b): for every , . The upper bound holds because has slope at most 1; the lower one because the derivative of is , and the difference is 0 at . Putting gives the bounds. (algebra; from S4)
- For (c), the median: the mean of over a test set is minimised when is a median of the . Since the logarithm is increasing, this is when is a median of the . (monotonicity; from S5)
- For (c), the bound: with the log errors of the test set, write , and for the mean of the sMAPE terms of the test set. Averaging the bounds of step 5 over the test set gives for every . Let minimise , so that . Then Multiplying by 2 gives , the stated inequality. (algebra; from S5)
- For (c), not the median in general: take the five actuals , whose median is . With the forecast at the log errors are in size and the sMAPE terms sum to . With the forecast at 1 the log errors are and the terms sum to , which is lower. So the median does not minimise the sMAPE of this test set, although it minimises its log-MAE (step 6). (algebra; from S6)
- So . It rises from 0 like half the absolute log error and levels off at 1. For small errors sMAPE is close to the log-MAE, and its minimiser is close to the median without in general being the median. (conclusion; from S8)
Proof of C9 (section H4 of the proof document A1, rendered in A2). The expected values of RMSE, MAE and MAPE become infinite for every forecast when the actuals have an infinite moment, such as an infinite mean (a heavy tail, C8). The expected sMAPE never does, and there is always a best forecast.
Foundation: Kolmogorov probability axioms and real analysis
- Finite. For positive values, (C3), which lies between 0 and 1. For any signs, , so again . A quantity between 0 and 1 has an expectation between 0 and 1, so the expected sMAPE is between 0 and 200, whatever the actuals. (earlier result; from C3)
- A best forecast. Write for the expectation over the random actual . As approaches 0 or grows without bound, grows for every positive value of , so approaches 1 (C3), and so does its expectation. For every positive it is below 1. It changes continuously with , because does and is at most 1 (bounded convergence). A continuous function that is below 1 in between and returns towards 1 at both ends reaches a lowest value at some . A forecast of 0 or a negative forecast scores 1 on every positive actual, so it is never better. (bounded convergence; from C3, D1)
- So the expected sMAPE is always finite, whatever the tails of the actuals. For positive actuals, a forecast with the lowest expected sMAPE always exists. (conclusion; from S2)
Definitions
Methods 1
D31 formula checks: Numerical checks of the formulas of the formal claims (claimset-code/smape-target/check_formulas.py, seed 6; check_jump.py for C11): identities and inequalities on 200000 random pairs, derivatives against finite differences, minimisers, balances and thresholds against quadrature and bisection on every setting of the selection design, and the large-spread expansion against its bound. For the claims new or reworded in version 3 (C3, C4, C12, C17 to C20): check_v3.py (seed 8), check_h39.py and check_corrected.py (seed 8), in the same way.
Variables and measures 13
D2 sMAPE: Symmetric mean absolute percentage error of a point forecast over a test set of actuals : , where a term with counts as 0. Introduced as the symmetric MAPE by Makridakis (1993), whose denominator had no absolute values; for positive actuals and forecasts the two agree. Source: Makridakis (1993).
D1 sMAPE term: The contribution of one actual and one point forecast to sMAPE: , between 0 and 1, with when (including , where the fraction is ).
D3 expected sMAPE: The expected sMAPE of a fixed forecast under the distribution of the actual : , where is the expectation over the random actual . Computed from the distribution (by integration or exact sums), never from a sample.
D4 log error: For a positive actual and a positive forecast , .
D5 weight: For a positive actual and a positive forecast , : how much the actual pulls the forecast that minimises expected sMAPE, since the derivative of in is . Largest at , the same for and .
D10 RMSE: Root mean squared error of a point forecast over a test set of actuals : .
D11 MAE: Mean absolute error of a point forecast over a test set of actuals : .
D19 log-MAE: 100 times the mean absolute error of as a forecast of : . Unbounded; sMAPE's small-error limit (C3); minimised by the median.
D28 Suilin term: The contribution of one actual and one forecast to the Suilin loss: the Suilin loss is 200 times its mean over a test set. It replaces the denominator of the sMAPE term. Proposed by Suilin (2017) in code for a Kaggle competition, as a smoothed variant of sMAPE; defined in print by Hewamalage, Bergmeir and Bandara (2021, Eq. 15), who write the constant as and the factor 2 into the measure differently (a constant factor changes no property here). Hewamalage, Ackermann and Bergmeir (2023) call it msMAPE; Smyl (2025) gives that name to a different measure, so this study follows Kolassa (2026) and calls it the Suilin loss. Version 2 of this paper called it msMAPE. Source: Hewamalage et al. (2021).
D33 msMAPE term: The contribution of one actual and one forecast to the sparse-proof sMAPE (msMAPE) of Smyl (2025), as Kolassa (2026, Definition 4) states it, for a small constant (Kolassa writes it , which is the median here): which is 0 when ; msMAPE is 200 times its mean over a test set (Kolassa writes the factor 2 into the term). It replaces the actual in the denominator of the sMAPE term by when the actual is below . Source: Kolassa (2026).
D8 sMAPE minimiser of a test set: The forecast that minimises the sMAPE of one test set , , found numerically (the sample counterpart of the sMAPE target).
D9 relative efficiency: For a test-set size and an outcome distribution where sMAPE and MAE both target the median: over test sets, where is the sample median (the MAE minimiser) and the sMAPE minimiser of the same test set. Above 1, sMAPE's minimiser varies less; below 1, MAE's does.
D32 signal-to-noise ratio of a comparison: For a measure with term , two forecasts and and a distribution of the actual : , where is the difference of the two forecasts' scores on one actual. Over a test set of independent actuals the mean of is times this many of its standard errors from zero: the larger the ratio, the smaller the test set that tells the two forecasts apart.
Concepts 1
D6 sMAPE target: The value or values of that minimise expected sMAPE for a given distribution of the actual , : the functional sMAPE rewards. It may be a single value or several.
Context
- Extends B10 · from C9
- Hewamalage et al. (2023) note that sMAPE is bounded by 200; C9 adds that its expected value is therefore finite for every distribution and that a best forecast exists.
- Extends B12 · from C1
- Tofallis (2015) lists the sMAPE term, |y-f|/[(|y|+|f|)/2], among Tornqvist et al.'s measures of relative change; C1 shows it depends on the actual and the forecast only through their ratio.
- Extends B12 · from C3
- Tofallis (2015) relates sMAPE to the log accuracy ratio among relative measures; C3 shows the sMAPE term is exactly the hyperbolic tangent of half the absolute log ratio.
References
- Hewamalage, H., Bergmeir, C., Bandara, K., 2021. Recurrent Neural Networks for Time Series Forecasting: Current status and future directions. International Journal of Forecasting 37, 388–427. https://doi.org/10.1016/j.ijforecast.2020.06.008 Used by: D28
- Kolassa, S., 2026. The Symmetric Mean Absolute Percentage Error: Unnecessary or Dangerous. Forecasting 8, 24. https://doi.org/10.3390/forecast8020024 Used by: D33
- Makridakis, S., 1993. Accuracy measures: theoretical and practical concerns. International Journal of Forecasting 9, 527–529. https://doi.org/10.1016/0169-2070(93)90079-3 Used by: D2
Artefacts
- A1 · proof Proofs of the formal claims, version 3, in Markdown with LaTeX: section H3 with part (c); H5 shortened to the weighted median; new sections H12 (the ordinary median, with the checker's example), H13 (signal-to-noise ratios) and H14 (large-sample efficiency). Checked independently by AC6 (CK27 to CK31, CK34 to CK37) and corrected as it proposed; after its checks the notation was made consistent (no second meaning for k, a, G), which AC6 read and found to change nothing. Sections H1 to H14 prove C1, C2, C3, C9, C4, C5, C6, C7, C11, C8, C10, C12, C18 and C19, in that order. Sections H1 to H11 were also checked independently by lab actor AC4 (proof-check-report.md) and by the supervisor. proofs.md
- A2 · proof The same proofs, version 3, rendered as PDF. proofs.pdf
- A6 · data Every result of the lab record (17182 results of 17 runs) at full precision: the lab result's ID, its run, the quantity as the run's script named it, its conditions and its value (both as JSON). The evidence's tables give the values to four significant digits. smape-target.results.csv
Score
Scores are computed by rules from the claimset file (EntryLib rubric 0.7): they check the record, not the science, and may change as the rubric and reviews develop. The rubric.