Version 3 answers a reader's comments. Corrected: C3 no longer says sMAPE is minimised by the median for small errors, only near it, with a bound; C4 keeps the weighted median, and C12 now holds what was said about the ordinary median; the measure called msMAPE in version 2 is the Suilin loss. Added: how well a test set tells two forecasts apart as the actuals spread out (C18); the large-sample distribution of the sMAPE minimiser (C19); Smyl's msMAPE (C20) and what it rewards on intermittent demand (C21). Also added: sections, the definition of sMAPE first, and a limitation on C6.
By Ivan Svetunkov (ORCID 0000-0001-7826-0281)
What does sMAPE reward? An analytical and simulation study · C20
Principal claim C20 of this paper (Svetunkov, I. (guarantor), 2026), with what it rests on. Read the whole paper.
Ask your AI: copies a message with this claim's address to paste into ChatGPT, Claude or Gemini. Text file: the claim with what it rests on as plain text, to attach when your assistant cannot open the address.
The message
Read https://entrylib.org/p/2026.000013/C20, one claim of a research paper with the evidence it rests on. Tell me briefly what it says and how well it is supported. If you cannot open the link, tell me instead of guessing. Then wait for my questions.
The claim
SupportS 99C20 · formal · planned test · novelty: extends earlier work, by the authors
The msMAPE term is the sMAPE term except for actuals below . For , and : (a) where ,; so when every actual is at least , msMAPE is sMAPE and has the same target. (b) Where ,: for a zero actual it is , which is 0 at and rises towards 1 as grows, where the sMAPE term is 1 for every . (c) , with where ; and for every , is continuous in at , so the expected msMAPE term has no jump at the zero forecast, where the expected sMAPE term jumps when zero actuals have positive probability. (d) On counts with , differs from only for zero actuals.
Proof: E37 · Data: E31 · Extends:Kolassa (2026) · Extends:B16 · Verification: checked by an agent · Planned: lab plan PL12, planned 18 November 2026 · Outcome: judged by the writer
Numerical checks of the formulas of the claims new or reworded in version 3 (formula checks), lab run RN13 (check_v3.py, seed 8) under the formal plan that decided C3, C4, C12, C17 and C20; every check is within the plan's tolerances. They check the formulas on concrete numbers; the proofs are the evidence for the claims. The tables are labelled by the hypotheses the run's script names: H3 (T1 and T2) checks C3; H4 (T3) checks C4; H34 (T4 and T5) checks C12; H35 (T6 and T7) checks C17; H42 (T8 and T9) checks C20. The tables of H39 (T10 to T12) and H40 (T13 to T17) check the formulas of C18 and C19, whose wording was decided after later checks (E32, E33).
E31.T1 · violations of the bound on the log-MAE of the sMAPE minimiser, largest excess of the minimiser's log-MAE over the median's, minus the bound; hypothesis: H3, test_sets: 2000 (lab runs RN13) (hypothesis: H3, test_sets: 2000)
Row
violations of the bound on the log-MAE of the sMAPE minimiser
largest excess of the minimiser's log-MAE over the median's, minus the bound
r1
0
0.0000
E31.T2 · sum of sMAPE terms, forecast at the median, actuals 1, 1, e, e^4, e^4, sum of sMAPE terms, forecast at 1, actuals 1, 1, e, e^4, e^4; hypothesis: H3 (lab runs RN13) (hypothesis: H3)
Row
sum of sMAPE terms, forecast at the median, actuals 1, 1, e, e^4, e^4
sum of sMAPE terms, forecast at 1, actuals 1, 1, e, e^4, e^4
r1
2.735
2.39
E31.T3 · largest difference of the weights below and above the target, over their sum; hypothesis: H4, distributions: 6 (lab runs RN13) (hypothesis: H4, distributions: 6)
Row
largest difference of the weights below and above the target, over their sum
r1
0.0000
E31.T4 · distributions with more than one local minimum, distributions where the target is not on the side of the median that carries more weight; hypothesis: H34, distributions: 6 (lab runs RN13) (hypothesis: H34, distributions: 6)
Row
distributions with more than one local minimum
distributions where the target is not on the side of the median that carries more weight
r1
0
0
E31.T5 · largest distance in logs between the target and the median, lognormal and log-Laplace; hypothesis: H34, distributions: 16 (lab runs RN13) (hypothesis: H34, distributions: 16)
Row
largest distance in logs between the target and the median, lognormal and log-Laplace
r1
0.0000
E31.T6 · Suilin term of a zero forecast of a zero actual; hypothesis: H35 (lab runs RN13) (hypothesis: H35)
Row
Suilin term of a zero forecast of a zero actual
r1
0
E31.T7 · largest error of the identity of (a), largest error of the identity of (b), values of the Suilin term outside [0, 1); hypothesis: H35, pairs: 200000 (lab runs RN13) (hypothesis: H35, pairs: 200000)
Row
largest error of the identity of (a)
largest error of the identity of (b)
values of the Suilin term outside [0, 1)
r1
0.0000
0
0
E31.T8 · largest error of the identity of (a), largest error of the identity of (b), values of the msMAPE term outside [0, 1], values of the msMAPE term not below 1 for actuals below nu, pairs with a count of at least 1 where the msMAPE and sMAPE terms differ by nu; hypothesis: H42, pairs: 200000 (lab runs RN13) (hypothesis: H42, pairs: 200000)
Row
nu
largest error of the identity of (a)
largest error of the identity of (b)
values of the msMAPE term outside [0, 1]
values of the msMAPE term not below 1 for actuals below nu
pairs with a count of at least 1 where the msMAPE and sMAPE terms differ
r1
0.1
0
0
0
0
0
r2
0.5
0
0
0
0
0
r3
1.0
0
0
0
0
0
E31.T9 · msMAPE term of a forecast of 1e-9 for a zero actual by nu; hypothesis: H42 (lab runs RN13) (hypothesis: H42)
Row
nu
msMAPE term of a forecast of 1e-9 for a zero actual
r1
0.1
0.0000
r2
0.5
0.0000
r3
1.0
0.0000
E31.T10 · signal-to-noise ratio of sMAPE over its large-spread formula, signal-to-noise ratio of the absolute error over its limit by error_distribution, c1, c2; hypothesis: H39, sigma: 200 (lab runs RN13) (hypothesis: H39, sigma: 200)
Row
error_distribution
c1
c2
signal-to-noise ratio of sMAPE over its large-spread formula
signal-to-noise ratio of the absolute error over its limit
r1
normal
0.0
0.5
0.9999
0.9913
r2
normal
0.0
1.0
1
0.9956
r3
normal
-0.5
1.5
1.001
0.9966
r4
Gumbel
0.0
0.5
0.9998
0.9647
r5
Gumbel
0.0
1.0
1
0.9937
r6
Gumbel
-0.5
1.5
1
0.9967
E31.T11 · relative spread of the absolute log error's signal-to-noise ratio over sigma = 2, 10, 50 by error_distribution, c1, c2; hypothesis: H39 (lab runs RN13) (hypothesis: H39)
Row
error_distribution
c1
c2
relative spread of the absolute log error's signal-to-noise ratio over sigma = 2, 10, 50
r1
normal
0.0
0.5
0.0000
r2
normal
0.0
1.0
0.0000
r3
normal
-0.5
1.5
0.0000
r4
Gumbel
0.0
0.5
0.0000
r5
Gumbel
0.0
1.0
0.0000
r6
Gumbel
-0.5
1.5
0.0000
E31.T12 · signal-to-noise ratio of the squared error over its formula, lognormal, exp(sigma^2 / 2) times the squared error's ratio, lognormal, formula by c1, c2, sigma; hypothesis: H39 (lab runs RN13) (hypothesis: H39)
Row
c1
c2
sigma
signal-to-noise ratio of the squared error over its formula, lognormal
exp(sigma^2 / 2) times the squared error's ratio, lognormal, formula
r1
0.0
0.5
0.5
1
r2
0.0
1.0
0.5
1
r3
-0.5
1.5
0.5
1
r4
0.0
0.5
1.0
1
r5
0.0
1.0
1.0
1
r6
-0.5
1.5
1.0
1
r7
0.0
0.5
2.0
1
r8
0.0
1.0
2.0
1
r9
-0.5
1.5
2.0
1
r10
0.0
1.0
4.0
0.9907
r11
0.0
1.0
6.0
1
E31.T13 · distributions compared with the asymptotic values recorded by RN7; hypothesis: H40 (lab runs RN13) (hypothesis: H40)
Row
distributions compared with the asymptotic values recorded by RN7
r1
16
E31.T14 · distributions where A is not below 2 g at the median, largest difference from the asymptotic values recorded by RN7; hypothesis: H40, distributions: 16 (lab runs RN13) (hypothesis: H40, distributions: 16)
Row
distributions where A is not below 2 g at the median
largest difference from the asymptotic values recorded by RN7
r1
0
0.0001
E31.T15 · large-sample relative efficiency, formula by family, spread; hypothesis: H40 (lab runs RN13) (hypothesis: H40)
Row
family
spread
large-sample relative efficiency, formula
r1
lognormal
0.25
0.9696
r2
lognormal
0.5
0.8881
r3
lognormal
1.0
0.6601
r4
lognormal
1.5
0.454
r5
lognormal
2.0
0.3073
r6
lognormal
3.0
0.1474
r7
lognormal
4.0
0.0778
r8
lognormal
6.0
0.0279
r9
log-Laplace
0.25
0.9969
r10
log-Laplace
0.5
0.9765
r11
log-Laplace
1.0
0.8953
r12
log-Laplace
1.5
0.8036
r13
log-Laplace
2.0
0.7207
r14
log-Laplace
3.0
0.5903
r15
log-Laplace
4.0
0.4969
r16
log-Laplace
6.0
0.3755
E31.T16 · distance of the large-sample relative efficiency from 1 at spread 0.01 by family; hypothesis: H40 (lab runs RN13) (hypothesis: H40)
Row
family
distance of the large-sample relative efficiency from 1 at spread 0.01
r1
lognormal
0.0001
r2
log-Laplace
0.0000
E31.T17 · large-sample relative efficiency times sigma^3 over 6 (ln 2)^2 sqrt(2 pi), lognormal, large-sample relative efficiency times b over 3, log-Laplace; hypothesis: H40, spread: 200 (lab runs RN13) (hypothesis: H40, spread: 200)
Row
large-sample relative efficiency times sigma^3 over 6 (ln 2)^2 sqrt(2 pi), lognormal
large-sample relative efficiency times b over 3, log-Laplace
r1
0.9998
0.9906
E32 · quant · other
Numerical checks of the formulas of C18 (formula checks), lab run RN18 (check_h39.py) under the formal plan that decided C18; every check is within the plan's tolerances. They check the formulas on concrete numbers; the proof is the evidence for the claim. The run's script labels the checks H39, the record's first wording of C18; the formulas are those of C18.
E32.T1 · distance of sMAPE's signal-to-noise ratio over its large-spread formula from 1, distance of the absolute error's signal-to-noise ratio over its limit from 1 by error_distribution, c1, c2, sigma; hypothesis: H39 (lab runs RN18) (hypothesis: H39)
Row
error_distribution
c1
c2
sigma
distance of sMAPE's signal-to-noise ratio over its large-spread formula from 1
distance of the absolute error's signal-to-noise ratio over its limit from 1
r1
normal
0.0
0.5
200
0.0001
0.0087
r2
normal
0.0
0.5
2000
0.0000
0.0009
r3
normal
0.0
1.0
200
0.0004
0.0044
r4
normal
0.0
1.0
2000
0.0000
0.0004
r5
normal
-0.5
1.5
200
0.0012
0.0034
r6
normal
-0.5
1.5
2000
0.0001
0.0003
r7
Gumbel
0.0
0.5
200
0.0002
0.0353
r8
Gumbel
0.0
0.5
2000
0.0000
0.0035
r9
Gumbel
0.0
1.0
200
0.0002
0.0063
r10
Gumbel
0.0
1.0
2000
0.0000
0.0006
r11
Gumbel
-0.5
1.5
200
0.0004
0.0033
r12
Gumbel
-0.5
1.5
2000
0.0000
0.0003
E32.T2 · relative spread of the absolute log error's signal-to-noise ratio over sigma = 2, 10, 50 by error_distribution, c1, c2; hypothesis: H39 (lab runs RN18) (hypothesis: H39)
Row
error_distribution
c1
c2
relative spread of the absolute log error's signal-to-noise ratio over sigma = 2, 10, 50
r1
normal
0.0
0.5
0.0000
r2
normal
0.0
1.0
0.0000
r3
normal
-0.5
1.5
0.0000
r4
Gumbel
0.0
0.5
0.0000
r5
Gumbel
0.0
1.0
0.0000
r6
Gumbel
-0.5
1.5
0.0000
E32.T3 · distance of the squared error's signal-to-noise ratio over its formula from 1, lognormal, distance of exp(sigma^2 / 2) times the squared error's ratio from 1, lognormal, formula by c1, c2, sigma; hypothesis: H39 (lab runs RN18) (hypothesis: H39)
Row
c1
c2
sigma
distance of the squared error's signal-to-noise ratio over its formula from 1, lognormal
distance of exp(sigma^2 / 2) times the squared error's ratio from 1, lognormal, formula
r1
0.0
0.5
0.5
0.0000
r2
0.0
1.0
0.5
0.0000
r3
-0.5
1.5
0.5
0.0000
r4
0.0
0.5
1.0
0.0000
r5
0.0
1.0
1.0
0.0000
r6
-0.5
1.5
1.0
0.0000
r7
0.0
0.5
2.0
0.0000
r8
0.0
1.0
2.0
0.0000
r9
-0.5
1.5
2.0
0.0000
r10
0.0
1.0
4.0
0.0093
r11
0.0
1.0
6.0
0.0000
r12
0.0
1.0
8.0
0.0000
E33 · quant · other
Numerical checks of the formulas of C19 (formula checks), lab run RN16 (check_corrected.py, seed 8) under the formal plan that decided C19; every check is within the plan's tolerances. They check the formulas on concrete numbers; the proof is the evidence for the claim. The run's script labels the checks by the record's first wordings: H40 (T4 to T7 and the result R1) checks C19; H39 (T1 to T3) checks the formulas of C18, which the same plan tested in an earlier wording.
R1 distributions compared with the asymptotic values recorded by RN7 = 16 (hypothesis: H40)
E33.T1 · distance of sMAPE's signal-to-noise ratio over its large-spread formula from 1, distance of the absolute error's signal-to-noise ratio over its limit from 1 by error_distribution, c1, c2, sigma; hypothesis: H39 (lab runs RN16) (hypothesis: H39)
Row
error_distribution
c1
c2
sigma
distance of sMAPE's signal-to-noise ratio over its large-spread formula from 1
distance of the absolute error's signal-to-noise ratio over its limit from 1
r1
normal
0.0
0.5
200
0.0001
0.0087
r2
normal
0.0
0.5
2000
0.0000
0.0009
r3
normal
0.0
1.0
200
0.0004
0.0044
r4
normal
0.0
1.0
2000
0.0000
0.0004
r5
normal
-0.5
1.5
200
0.0012
0.0034
r6
normal
-0.5
1.5
2000
0.0001
0.0003
r7
Gumbel
0.0
0.5
200
0.0002
0.0353
r8
Gumbel
0.0
0.5
2000
0.0000
0.0035
r9
Gumbel
0.0
1.0
200
0.0002
0.0063
r10
Gumbel
0.0
1.0
2000
0.0000
0.0006
r11
Gumbel
-0.5
1.5
200
0.0004
0.0033
r12
Gumbel
-0.5
1.5
2000
0.0000
0.0003
E33.T2 · relative spread of the absolute log error's signal-to-noise ratio over sigma = 2, 10, 50 by error_distribution, c1, c2; hypothesis: H39 (lab runs RN16) (hypothesis: H39)
Row
error_distribution
c1
c2
relative spread of the absolute log error's signal-to-noise ratio over sigma = 2, 10, 50
r1
normal
0.0
0.5
0.0000
r2
normal
0.0
1.0
0.0000
r3
normal
-0.5
1.5
0.0000
r4
Gumbel
0.0
0.5
0.0000
r5
Gumbel
0.0
1.0
0.0000
r6
Gumbel
-0.5
1.5
0.0000
E33.T3 · distance of the squared error's signal-to-noise ratio over its formula from 1, lognormal, distance of exp(sigma^2 / 2) times the squared error's ratio from 1, lognormal, formula by c1, c2, sigma; hypothesis: H39 (lab runs RN16) (hypothesis: H39)
Row
c1
c2
sigma
distance of the squared error's signal-to-noise ratio over its formula from 1, lognormal
distance of exp(sigma^2 / 2) times the squared error's ratio from 1, lognormal, formula
r1
0.0
0.5
0.5
0.0000
r2
0.0
1.0
0.5
0.0000
r3
-0.5
1.5
0.5
0.0000
r4
0.0
0.5
1.0
0.0000
r5
0.0
1.0
1.0
0.0000
r6
-0.5
1.5
1.0
0.0000
r7
0.0
0.5
2.0
0.0000
r8
0.0
1.0
2.0
0.0000
r9
-0.5
1.5
2.0
0.0000
r10
0.0
1.0
4.0
0.0093
r11
0.0
1.0
6.0
0.0000
r12
0.0
1.0
8.0
0.0000
E33.T4 · large-sample relative efficiency, formula by family, spread; hypothesis: H40 (lab runs RN16) (hypothesis: H40)
Row
family
spread
large-sample relative efficiency, formula
r1
lognormal
0.25
0.9696
r2
lognormal
0.5
0.8881
r3
lognormal
1.0
0.6601
r4
lognormal
1.5
0.454
r5
lognormal
2.0
0.3073
r6
lognormal
3.0
0.1474
r7
lognormal
4.0
0.0778
r8
lognormal
6.0
0.0279
r9
log-Laplace
0.25
0.9969
r10
log-Laplace
0.5
0.9765
r11
log-Laplace
1.0
0.8953
r12
log-Laplace
1.5
0.8036
r13
log-Laplace
2.0
0.7207
r14
log-Laplace
3.0
0.5903
r15
log-Laplace
4.0
0.4969
r16
log-Laplace
6.0
0.3755
E33.T5 · distance of the large-sample relative efficiency from 1 at spread 0.01 by family; hypothesis: H40 (lab runs RN16) (hypothesis: H40)
Row
family
distance of the large-sample relative efficiency from 1 at spread 0.01
r1
lognormal
0.0001
r2
log-Laplace
0.0000
E33.T6 · distributions where A is not below 2 g at the median, largest difference from the asymptotic values recorded by RN7; hypothesis: H40, distributions: 16 (lab runs RN16) (hypothesis: H40, distributions: 16)
Row
distributions where A is not below 2 g at the median
largest difference from the asymptotic values recorded by RN7
r1
0
0.0001
E33.T7 · large-sample relative efficiency times sigma^3 over 6 (ln 2)^2 sqrt(2 pi), lognormal, large-sample relative efficiency times b over 3, log-Laplace; hypothesis: H40, spread: 200 (lab runs RN16) (hypothesis: H40, spread: 200)
Row
large-sample relative efficiency times sigma^3 over 6 (ln 2)^2 sqrt(2 pi), lognormal
large-sample relative efficiency times b over 3, log-Laplace
Proof of C20 (the second proof of the proof document A5). The msMAPE term is the sMAPE term except for actuals below its constant, where a zero actual no longer gives every non-zero forecast the largest value.
Foundation: Kolmogorov probability axioms and real analysis
(a). When ,, and because . So , which is for non-negative and . If every actual is at least , the two measures are then the same function of the forecast on every test set and under every distribution of such actuals, so they have the same minimisers. (algebra; from D33)
(b). When ,, so . For this is , which is 0 at , increasing in , below 1, and tends to 1 as grows. The sMAPE term of a zero actual is for every .(monotonicity; from S1)
(c), the bounds. because its numerator is non-negative and its denominator is at least . Where ,, since . Where : if ,; if ,. So there. (algebra; from S2)
(c), no jump at zero. The denominator is at least for every , so is a continuous function of on , at too. Since (step 3), the expected term is continuous in as well, by bounded convergence. The sMAPE term of a zero actual is 0 at and 1 for ; so when zero actuals have probability , the expected sMAPE term jumps by at .(bounded convergence; from S3)
(d). A count is 0 or at least 1. With , a count of at least 1 is at least , so by step 1. A zero count is below , where and for (step 2). (algebra; from S1, S2)
So the msMAPE term is the sMAPE term for actuals of at least . Below its denominator no longer shrinks with the actual: a zero actual scores , and the expected msMAPE has no jump at the zero forecast. (conclusion; from S5)
Definitions
Methods 1
D31formula checks: Numerical checks of the formulas of the formal claims (claimset-code/smape-target/check_formulas.py, seed 6; check_jump.py for C11): identities and inequalities on 200000 random pairs, derivatives against finite differences, minimisers, balances and thresholds against quadrature and bisection on every setting of the selection design, and the large-spread expansion against its bound. For the claims new or reworded in version 3 (C3, C4, C12, C17 to C20): check_v3.py (seed 8), check_h39.py and check_corrected.py (seed 8), in the same way.
Variables and measures 12
D2sMAPE: Symmetric mean absolute percentage error of a point forecast over a test set of actuals :, where a term with counts as 0. Introduced as the symmetric MAPE by Makridakis (1993), whose denominator had no absolute values; for positive actuals and forecasts the two agree. Source: Makridakis (1993).
D1sMAPE term: The contribution of one actual and one point forecast to sMAPE: , between 0 and 1, with when (including , where the fraction is ).
D4log error: For a positive actual and a positive forecast ,.
D5weight: For a positive actual and a positive forecast ,: how much the actual pulls the forecast that minimises expected sMAPE, since the derivative of in is . Largest at , the same for and .
D10RMSE: Root mean squared error of a point forecast over a test set of actuals :.
D11MAE: Mean absolute error of a point forecast over a test set of actuals :.
D19log-MAE: 100 times the mean absolute error of as a forecast of :. Unbounded; sMAPE's small-error limit (C3); minimised by the median.
D28Suilin term: The contribution of one actual and one forecast to the Suilin loss:
the Suilin loss is 200 times its mean over a test set. It replaces the denominator of the sMAPE term. Proposed by Suilin (2017) in code for a Kaggle competition, as a smoothed variant of sMAPE; defined in print by Hewamalage, Bergmeir and Bandara (2021, Eq. 15), who write the constant as and the factor 2 into the measure differently (a constant factor changes no property here). Hewamalage, Ackermann and Bergmeir (2023) call it msMAPE; Smyl (2025) gives that name to a different measure, so this study follows Kolassa (2026) and calls it the Suilin loss. Version 2 of this paper called it msMAPE. Source: Hewamalage et al. (2021).
D33msMAPE term: The contribution of one actual and one forecast to the sparse-proof sMAPE (msMAPE) of Smyl (2025), as Kolassa (2026, Definition 4) states it, for a small constant (Kolassa writes it , which is the median here):
which is 0 when ; msMAPE is 200 times its mean over a test set (Kolassa writes the factor 2 into the term). It replaces the actual in the denominator of the sMAPE term by when the actual is below .Source: Kolassa (2026).
D8sMAPE minimiser of a test set: The forecast that minimises the sMAPE of one test set ,, found numerically (the sample counterpart of the sMAPE target).
D9relative efficiency: For a test-set size and an outcome distribution where sMAPE and MAE both target the median: over test sets, where is the sample median (the MAE minimiser) and the sMAPE minimiser of the same test set. Above 1, sMAPE's minimiser varies less; below 1, MAE's does.
D32signal-to-noise ratio of a comparison: For a measure with term , two forecasts and and a distribution of the actual :, where is the difference of the two forecasts' scores on one actual. Over a test set of independent actuals the mean of is times this many of its standard errors from zero: the larger the ratio, the smaller the test set that tells the two forecasts apart.
Concepts 1
D6sMAPE target: The value or values of that minimise expected sMAPE for a given distribution of the actual ,: the functional sMAPE rewards. It may be a single value or several.
Kolassa (2026, Proposition 3) shows that the minimisers of expected msMAPE on counts are integers; C20 shows where the msMAPE term equals the sMAPE term and that it removes the jump at the zero forecast.
Smyl (2025) proposed msMAPE, the sparse-proof sMAPE, as Kolassa (2026) reports; Smyl's article was not read. C20 states properties of its term as Kolassa (2026, Definition 4) defines it.
References
Hewamalage, H., Bergmeir, C., Bandara, K., 2021. Recurrent Neural Networks for Time Series Forecasting: Current status and future directions. International Journal of Forecasting 37, 388–427. https://doi.org/10.1016/j.ijforecast.2020.06.008Used by: D28
A5 · proof Proofs of C17 (record hypothesis H41: the Suilin loss beside sMAPE; the measure renamed, content as before) and of C20 (record hypothesis H42: the msMAPE of Smyl beside sMAPE), in Markdown with LaTeX; checked independently by AC6 (CK32, CK33). The msMAPE term is written s_nu here, as in this claimset; the recorded statement writes p. In version 2 the file was proof-msmape.md. proof-suilin.md
A6 · data Every result of the lab record (17182 results of 17 runs) at full precision: the lab result's ID, its run, the quantity as the run's script named it, its conditions and its value (both as JSON). The evidence's tables give the values to four significant digits. smape-target.results.csv
Score
Scores are computed by rules from the claimset file (EntryLib rubric 0.7): they check the record, not the science, and may change as the rubric and reviews develop. The rubric.
−1Open problems Limitation L6 (reduces transferability, not mitigated): The definition of msMAPE is taken from Kolassa (2026, Definition 4). Smyl's article was not read. Smyl gives no value for the constant; ν = 0.1, 0.5 and 1 are this paper's choices. To remove it: Mitigate it with evidence, or narrow the claim's scope so that it no longer applies.